Cop32-90mm Low Air Pressure DTH Bit for DTH Hammer

• Type: Drill Bit
• Material: Alloy Steel
• Usage: Well Drilling or Ore Mining
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: COP32-90
• Model Number: Mach 303, Mach 44
• Tungsten Carbide: Yk05/T6
• Carbide Shape: Dome, Ballistic
• Face: Flat, Convex, Concave
• Foot Valve: with Foot Valve and Without
• High Pressure: 1-2.5MPa
• Transport Package: Wooden Package
• Specification: CE, SGS, ISO: 9001
• Trademark: PRODRILL
• Origin: China
• HS Code: 82071990
• Production Capacity: 10000PCS/Month
• Package Size: 40.00cm * 40.00cm * 40.00cm
• Package Gross Weight: 10.000kg

Product Description

High and Low Air Pressure DTH Bit for DTH Hammer




Bit Face Shape Selection:
 
 1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
 2. Concave Face
 The all-around application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.
 3. Convex Face
 For  high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
  4. Flat Face Bit
 This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.  
 
Carbide Button Shape Selection:
1. Semi-Ballistic Buttons
2. Ballistic Button
3. Spherical Button
4. Two-step Button

 
 Type of DTH Bits:

Head Diameter :	64 mm -200 mm (D)
Button Type:	Semispherical Button, Ballistic Button, Conical Button
Bit Face:	Flat Face, Concave Face, Convex Face, Drop-Center Face
Material:	High quality tungsten carbide

Type of Buttons:

Semispherical button:	This type button is suitable for very abrasive and very hard rock formations, it's usually used as gauge buttons of DTH bits.
Ballistic button / Parabolic button:	This type button is suitable for medium abrasive and hard rock formations, it's usually used as gauge buttons and front buttons of DTH bits.
Conical button:	This type button is suitable for medium abrasive and medium hard formations, it's usually used as front buttons of DTH bits, If the rock is soft, it can be also used as gauge buttons.