Coprod89-127 Dril Bits of Well Drilling

• Customization: Available
• Type: Drill Bit
• Material: Carbon Steel
• Model NO.: COPROD89-127
• Usage: Well Drilling, Ore Mining
• Diameter: 127mm
• Air Holes No.: 3
• Gauge Buttons: 9*16mm
• Face Buttons: 6*15mm
• Convex Button: 4*14mm
• Face Design: Convex Face
• Bit Face Type: Semi-Ballistic
• Transport Package: Wood Package
• Specification: CE, SGS, ISO9001
• Trademark: PRODRILL
• Origin: China
• HS Code: 82071990
• Production Capacity: 10000PCS/Months
• Package Size: 40.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 22.000kg

Product Description

Product Description

 

Prodrill ™Advantages of COPROD Drill Bit:

•  The longer life of the drill: the alloy material, with longer using lifewhich better than the similar products;
•  High Drilling Efficiency: the drill buttons is wear-resistant, so that thedrill can always keep sharp, thus greatly improving the speed of thedrilling.  
• The drilling speed is stable: the bit is scraped and cut to break therock. Good Performance: the ProDrill COPRODDrill bit has strong wearresistance, good diameter protection and can make the cutting teethbe used efficiently.
• The use of a wide range: the practice proves that the bit is suitablefor carbonate rock, limestone, chalk, clay rock, siltstone, sandstoneand other soft and hard (9 - grade drillability of rock, hard rockdrilling),compared with normal bit, especially drilling in 6-8 graderock the effect is particularly significant.

The ProDrill COPRODDrill bit is mainly used in geological exploration, coal mine, waterconservancy and hydropower, highway, railway, bridge, construction and construction, etc.

 

Diameter	Air Holes No.	Face Design
127mm	3	Convex Face

 

Convex Face:

This Convex face is suitable for low- to medium-pressure drilling ofsoft-medium hard rock formations, and the drill block is not easy tocorrode.The characteristics of this design are the low load of the sidebutton, the wear is not badly and the drilling speed is fast.

 

Semi-Ballistic button:

Ballistic buttons are usually used as front buttons of dth bits, suitable for medium abrasive andmedium hard formations. They can also be used as gauge buttons if the rock is soft.