Single Roller Cone Cutters Tricone Rock Bit Palm for Foundation Rotary Drilling

• Customization: Available
• Customized: Customized
• Length: Taper-length
• Model NO.: Tricone Rock Bit
• Product Name: Prodrill Tricone Bit for Water Well and Oil Field
• Size: 1-18 Inch
• Suitable Formation: Soft, Medium Soft, Hard, Medium Hard, Very Hard
• Bearing Type: Sealed Bearing and Non-Sealed Bearing
• Transport Package: Wooden Package
• Specification: all size
• Trademark: Prodrill
• Origin: China
• HS Code: 8207191
• Production Capacity: 100sets/Month

Product Description

General Introduction:

Key Word:
tricone bit,  tricone drill bit, used tricone bits for sale, tci tricone bit, tricone rock roller bits, used tricone bits, tricone rock bit, tci tricone rock bit, tricone roller bit, tricone bit roller bit drill bits, steel tooth tricone bit

Description:

 

Basical Specification
Size of tricone bit	8 1/2" inch 215.9mm
IADC CODE	HA 637G
Bearing type	rubber /metal o-ring journal bearing
Operating Parameters
WOB (Weight On Bit)	0.35~1.05 KN/mm (bit Dia.)
Rotary speed	140~70 r/min
Make up torque	16.3~21.7 KN.M
Formation	Medium formation with high compressive strength ,and high drillability ,such as mudstone,gypsum,salt,soft limestone,etc.

 

 

The Advantages of single cone bit

   1. Single cone bit is a bit slow, that cone drill bit of speed than the speed of smaller, mainly chaotic cutting rock, suitable for high-speed, high pressure drilling wells sidetracking the old, old wells deepened so slim hole drilling.

Applications more widely applicable not only to lateral drilling, and can be used in deep wells. 
 

 

2. Working torque than the PDC drill bit in the same conditions of pressure and lower strata can reduce the problem of small size drill expansion button to avoid mine accidents.

 

3. Single cone bit with both three-cone bit and PDC bit of advantage, there is a difference between the two Surrounded by a shortage of more than three-cone bit more suitable for large plastic formation, but also can be applied to PDC bit difficult to deal with hard interlayer, and other complex formations. 
4. With the downhole drill motor to achieve high speed and special drilling needs.
5. Size: various sizes 5 7/8"-17 1/2"
 

 

Extremely high quality tungsten carbide

High effectively cutting ability abd strong anti-breaking ability , which can increase ROP and improve service life of bit effectively 
 

Metal sealed journal bearing extend cutter

The bit can achieve longer service life and higher reliability.

 

 

 

 

2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure:Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure:Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available:Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",14 3/4",17 1/2", etc.
IADC Code:1-- Series, 2-- Series, 3-Series

3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure:Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available:Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code:1-- Series,2-- Series,3-- Series



4.Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code:                      1-- Series,2-- Series,3-- Series

IADC	WOB (KN/mm)	RPM (r/min)	Applicable Formations
437/447/435	0.35~0.9	240~70	Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc.
517/527/515	0.35~1.0	220~60	Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone, etc.
537/547/535	0.45~1.0	220~50	Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/615	0.45~1.1	200~50	Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc
637/635	0.5~1.1	180~40	Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

Terms&Conditions of Ordering:
1 .Payment Terms: T/T (Telegraphic Transfer) or Western Union
2. Delivery Term:
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Transportation:
Sample order: we suggest Courier express or by air
Bulk order: we suggest by air or by sea.
4. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B Our sales team and Technical Support will response for your question within 24 hours (Holidays Excluded) through skype
 
C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund.
Prodrill is not only the experts in the Import & export field but the leader on Mining, Construction equipments and rock drilling tools. Prodrill has a comprehensive supply of Rock tools for world leading top hammer manufacturers like Atlas Copco, Ingersoll-Rand etc. such as: Taper /Percussive Bits and Rod, DTH hammer, Bit & rod, RC hammer, Bit & Rod,ODEX, Symmetric,Concentric overburden Casing System.


3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure: Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3-- Series

4. Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.

Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory

About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.
2. We have advanced technology and equipment.
3. Our technician has more than 13 year's professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.

IADC	WOB (KN/mm)	RPM (r/min)	Applicable Formations
437/447/435	0.35~0.9	240~70	Very soft formations with low compressive strength and high drillability,such as clay ,mudstone,chalk,gypsum,salt,soft limestone, etc.
517/527/515	0.35~1.0	220~60	Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone, etc.
537/547/535	0.45~1.0	220~50	Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/615	0.45~1.1	200~50	Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc
637/635	0.5~1.1	180~40	Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters