| Customization: | Available |
|---|---|
| Application: | Cut Large Block by Diamond Wire |
| Type: | Resin |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
55KW Diamond Wire Saw Machine for stone quarrying
Mainly used in quarrying for different types of marble, granit, sandstone and so on.
also can be used in stone blocks' quarring or cutting.
Diamond Wire Saw Machine For Stone Quarrying
Applied advanced design and fabrication technology, the machine is suitable for granite, marble and sandstone quarry opening.
The machine head can be adjusted and rotated automatically.
Imported vector frequency converters are equipped in to ensure the constant torque output. The feed speed can be adjusted automatically by the constant tension control system. The adjustment is stable, so the cutting condition is always remain the best.
The operation panel can be wire control and remote control, the monitor can show the instant current, feed speed and cutting datas
1. The wire allows greater sawing heights than large discs. It is possible to cut large block by diamond wire;
2. Thinner cutting width, and more precise;
3. By virtue of its reliability, adjust the cutting techniques according to different stone material;
4. Noise nuisance generated by diamond wire saw is significantly less than produced by other sawing techniques;
5. Less noice, less pollution, noise generated by diamond wire saw is much less than discs cutting.
| Model | PD-75 | PD-55 | PD-45 | PD-37 |
| Driving motor power (KW/HP) | 75KW-6P/8P 100HP-6P/8P |
55KW-6P/8P 75HP-6P/8P |
45KW-6P/8P 60HP-6P/8P |
37KW-8P 50HP-8P |
| Flywheel diameter (mm) | 800/1000 | 660/800 | 660/800 | 660/800 |
| Wire saw length (m) | 20-150 | 20-120 | 20-100 | 20-80 |
| Wire saw diameter (m) | 11.5 | 11.5 | 11.5 | 11.5 |
| Line speed (m/s) | 0-50 | 0-40 | 0-40 | 0-40 |
| Walking speed of machine(m/h) | 0-100m/h (Slow:0.36/min;Fast:2.20m/min) | |||
| Total power (kw) | 78 | 58 | 48 | 40 |
| Walking motorpower (kw) | 0.75 (6P) | |||
| Driving head rotation motor power (kw) | 1.5 (6P) | 1.1(6P) | ||
| Driving head walking motor power (kw) | 1.1 (6P) | |||
| Rotation angle | 360' | |||
| Driving head moving range (mm) | 0-600 | 0-550 | ||
| Rail length (mm) | 4*2m+1*1m | |||
| Driving motor RPM (r/min) | 980/740 | |||
| Allowed working temperature | '-15°C/+40°C | |||
| Voltage | AC380±10% 50Hz | |||
| Net Weight (T) | 2.8T | 2.4T | 2.3T | 2.1T |
| Dimension L*W*H (mm) | 2200*1450*1650 | 2000*1250*1500 | ||
Functions and Features:
1.Being controlled by two sets of inverters and applying constant tension control principle, the moving speed of the machine can be adjusted automatically accordingto the changes of the cutting force to make sure the diamond wire saw be in the best cutting condition all the time.
2.The machine is without phase request. It doesn' t need to change or distinguish the power phase. The machine has the following protection functions: wire broken protection, over-loading,protection,open-phase protection, terminal limit, and so on.
3.The lateral moving and the rotation angle of the cutting head are controlled and driven by electric motor. There is photoelectric proximity switch installed on thecutting head for position limitation protection. This function enables the machine to work normally under harsh circumstance with moisture and dust.
4.The real-time parameters are displayed on the control platform, such as the set current of the main motor, the current and the rotation speed of the main motor,etc. It makes the operation and adjustment of the machine more convenient.
5.The machine can be operated manually and automatically. The manual and automatic functions can be shifted from each other. Under the automatic function, themachine can be unattended operated, and one worker is able to operate multiple machine.
){kind=link}