Company Profile
We offer IR hammer, DHD3.5, DHD340a, DHD360, DHD380, COP and QL hammer. The optimum range of
hole size for blast drilling with DTH is 90mm to 254 mm, smaller blast holes are generally drilled using top
hammer, and larger holes generally use rotary machines. Our hammer like COP and QL are known for their
reliability and longevity.
ProDrill™ DTH Hammer's repair kit ( E-Kit ) including top sub , external cylinder, guided sleeve, drive chunk, Generally speaking, the external cylinder can be
replaced after it is worn out, but we do not recommend replacing the external cylinder. Replacing the outer cylinder is very troublesome. Because our DTH
hammer is not so high cost , one set of E-Kit cost is 50% of one new dth hammer , it is more cost-effective to buy the new one hammer directly.
Product Parameters
The Characteristics of Valveless DTH Hammer:
1.High Impact Frequency and Higher Penetration;
2.Low air consumption and Fuel saving;
3. No Exhaust Tube Recess;
4.Simplicity of design and Easy Service.
Description:We manufacture DTH Hammers in different sizes ranging from 3 to 12. These hammers are
made corresponding to Drilling Bits to carry out prevalent objectives. These hammers are used in various
down the hole operations like bench Drilling. These are valve less hammers with optimized air cycle
frequency. These are heavy duty hammers that well at greater depths demanding less air usage, delivering minimum performance loss.
| Goods Name |
Size |
| DTH hammer |
5'' 6'' 7'' 8'' 9'' |
){kind=link}