Factory Price Tricone Bit for water well and oil
ProDrill offers a full line of tricone and bicone bits. Tricone drill bits are available in new and used (re-tip and re-run) steel tooth and tungsten carbide insert, size from 3 3/8"(85.7mm) to 26"(660.4mm) for use in all formations, with any bearing/seal type, and a wide range of additional custom features.
- Code No.: TCB-TCI-270
- Diameter: 270mm
- Diameter: 10 5/8"
- Pin Type Dimensions: 6 5/8" API
- Teeth Type: TCI
- IADC No.: 635
Rotary Drilling Tools: 10-5/8" IADC Code 635-Tricone Roller Bit with Tungsten Carbide Insert, Sealed Bearings, carbide side friction protection for semi hard to hard rock formation.
Application: Hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble
Tricone drill bits include Steel Tooth (or milled tooth) bits and Tungsten Carbide Insert (TCI) bits, TCI bits are much more durable than Steel Tooth bits, but with a higher cost to manufacture. Both types of Tricone Bits are available with
(1) Open Bearing or Sealed Bearing
(2) Roller Bearing or Friction Bearing (Journal Bearing)
(3) Gage Protected or Non-Gage Protected, etc.
ProDrill offers heavy duty tricone bits to meet your customized drilling needs. We have classified the bits based on their diameter (footprint), american petroleum industry number (API Number) and international association of drilling contractor number (IADC number). The IADC number further classifies the tricone bits based on the tooth material of construction, suitability for drilling into soft, medium or hard rock and bearing type used. All possible combinations of IADC number for tricone bits are available at ProDrill.
Tricone drill bits mostly used in mining 10-5/8" IADC 635
Wholesale steel tooth tungsten carbide API tungsten carbide API tricone bit roller bit drill bit
General Introduction:
Key Word:
tricone bit, tricone drill bit, used tricone bits for sale, tci tricone bit, tricone rock roller bits, used tricone bits, tricone rock bit, tci tricone rock bit, tricone roller bit, tricone bit roller bit drill bits, steel tooth tricone bit
Description:
1. Elasatomer Sealed Roller Bearing Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure:Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure:1. Abrasion resistance and seizure resistance of the bearing are improved. 2.Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Main Type Available:Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",13 5/8",14 3/4",15",15 1/2",17 1/2",22",24",26", etc.
IADC Code:1-- Series, 2-- Series,3-Serie
2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure:Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure:Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available:Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",14 3/4",17 1/2", etc.
IADC Code:1-- Series, 2-- Series, 3-Series
3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure:Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available:Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code:1-- Series,2-- Series,3-- Series
4.Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code: 1-- Series,2-- Series,3-- Series
| IADC |
WOB
(KN/mm) |
RPM
(r/min) |
Applicable Formations |
| 437/447/435 |
0.35~0.9 |
240~70 |
Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc. |
| 517/527/515 |
0.35~1.0 |
220~60 |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone, etc. |
| 537/547/535 |
0.45~1.0 |
220~50 |
Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
| 617/615 |
0.45~1.1 |
200~50 |
Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637/635 |
0.5~1.1 |
180~40 |
Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
Terms&Conditions of Ordering:
1 .Payment Terms: T/T (Telegraphic Transfer) or Western Union
2. Delivery Term:
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Transportation:
Sample order: we suggest Courier express or by air
Bulk order: we suggest by air or by sea.
4. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
and: + 86 139 1110 7654
C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund.
Prodrill is not only the experts in the Import & export field but the leader on Mining, Construction equipments and rock drilling tools. Prodrill has a comprehensive supply of Rock tools for world leading top hammer manufacturers like Atlas Copco, Ingersoll-Rand etc. such as: Taper /Percussive Bits and Rod, DTH hammer, Bit & rod, RC hammer, Bit & Rod,ODEX, Symmetric,Concentric overburden Casing System.
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory
About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.
2. We have advanced technology and equipment.
3. Our technician has more than 13 year's professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India,etc.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Audited Supplier 
){kind=link}