Factory price wholesale IADC tricone bit
Description:
1. Elasatomer Sealed Roller Bearing Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure: 1. Abrasion resistance and seizure resistance of the bearing are improved. 2. Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 13 5/8", 14 3/4", 15", 15 1/2", 17 1/2", 22", 24", 26", etc.
IADC Code: 1-- Series, 2-- Series, 3- Serie
2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure: Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure: Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 14 3/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3- Series
3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure: Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3-- Series
Technical Data
| PRODUCT SPECIFICATIONS |
|
|
|
|
|
|
|
| product name |
7 7/8 inch CA845 TCI tricone bit |
|
|
|
|
|
|
|
| size |
7 7/8 inch,200mm |
|
|
|
|
|
|
|
| model number |
CA845 |
|
|
|
|
|
|
|
| series |
CA |
|
|
|
|
|
|
|
| tooth type |
TCI |
|
|
|
|
|
|
|
| connection |
4 1/2" API Reg |
|
|
|
|
|
|
|
| bearing |
rubber sealed roller bearing |
|
|
|
|
|
|
|
| Nozzle |
three jet nozzles |
|
|
|
|
|
|
|
| application |
water well,oil well,HDD,exploration,etc |
|
|
|
|
|
|
|
| weight |
31kg |
|
|
|
|
|
|
|
| certificate |
API7-1,SY/T5164,ISO9001:2008 |
|
|
|
|
|
|
|
| RECOMMENDED ROCK FORMATION |
|
|
|
|
|
|
|
| hard formation with high abrasiveness,such as hard limestone,dolomite,hard sandstone and chert,etc. |
|
|
|
|
|
|
|
| RECOMMENDED DRILLING PARAMETERS FOR APPLICATION |
|
|
| Type&IADC code |
415 |
435 |
445 |
515,525 |
535,545 |
615,625 |
635,645 |
735,835 |
| WOB(KN/mm) |
0.35~0.90 |
0.35~0.95 |
0.35~1.00 |
0.35~1.05 |
0.35~1.05 |
0.35~1.05 |
0.70~1.20 |
0.70~1.20 |
| RPM(r/min) |
140~70 |
140~60 |
140~60 |
120~50 |
110~40 |
80~40 |
70~40 |
70~40 |
According to the number of cones, it can be divided into single-cone bit, tri-cone bit and assembled multi-cone bit. According to the cutting material, it can be divided into steel teeth (milling teeth) and insert roller bits.
The roller cone bit has been widely used as a tool for drilling rock formations. Significant improvements in drill performance directly reduce drilling costs, especially in the last decade. Two performance indicators, service life and drilling speed, which ultimately determine the extent to which the drill bit affects drilling costs. Increasing the drilling speed and service life of the drill bit is an effective way to reduce the drilling cost. It is confirmed by the data that the improvement of the drilling speed is more important than the improvement of the life of the drill bit to reduce the drilling cost. The improvement of the cutting structure of the drill bit is to improve the mechanical mechanism of the drill bit. The most direct method of drilling speed. For a long time, the improvement of cutting structure has mainly focused on the main cutting tooth structure. For example, in the case of cemented carbide tooth structure, wedge tooth, spoon tooth, partial spoon tooth, and other wear teeth have been invented. . It is gradually recognized that the gauge structure also has a great influence on the drilling speed and life of the drill bit. Especially in the case of high-angle wells and horizontal wells, the drill bit requires a reasonable diameter-preserving structure, and many new-type gauge structures have been researched and developed. Good results have been achieved when applied to roller cone bits.
It can be seen from the research and application dynamics of the drill bit manufacturer and the research institute in the three-cone bit diameter-preserving structure that people have gradually realized that the gauge structure has a great influence on the drilling speed and life of the drill bit, especially in the directional well and horizontal well application. The impact of the larger, research and development of the new drill bit diameter structure has achieved good results in the application of roller cone bits. The drill bit diameter structure has evolved from passive gauge to active gauge. The gauge material has evolved from low wear resistant material to high wear resistant composite material. The improvement of drill bit diameter structure and material has greatly improved the performance of the drill bit and further improved the drill bit. Mechanical drilling speed and life. There are certain gaps in the research of the structure and materials of the gauges at home and abroad. The relevant domestic research institutes and manufacturers of drills should further strengthen the research on the structure and materials of the gauges, especially focusing on the research and application of some active gauge structures in the drill bit to further improve the domestic teeth. The performance of the wheel bit provides the drilling user with a high-efficiency drill bit that adapts to the new drilling process.
The most widely used in oil drilling and geological drilling is the roller bit. The roller bit has the function of impact, crushing and shearing to break the formation rock when it is rotated. Therefore, the roller bit can adapt to various layers of soft, medium and hard. Especially after the emergence of the jet cone bit and the long nozzle cone bit, the drilling speed of the roller bit has been greatly improved, which is a major revolution in the development history of the cone bit. According to the type of teeth, the roller cone bit can be divided into milling gear (steel tooth) roller cone drill bit, insert tooth (carrying carbide tooth on the cone), roller cone drill bit, and can be divided into single cone drill bit and three teeth according to the number of cones. Wheel bit and assembly multi-cone bit. The most widely used and most commonly used is the tri-cone bit.
| IADC |
WOB
(KN/mm) |
RPM
(r/min) |
Applicable Formations |
| 437/447/435 |
0.35~0.9 |
240~70 |
Very soft formations with low compressive strength and high drillability,
such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc. |
| 517/527/515 |
0.35~1.0 |
220~60 |
Soft formations with low compressive strength and high drillability,
such as mudstone,gypsum,salt,soft limestone, etc. |
| 537/547/535 |
0.45~1.0 |
220~50 |
Soft to medium formations with low compressive strength,
such as medium, soft shale, medium soft limestone,
medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
| 617/615 |
0.45~1.1 |
200~50 |
Medium hard formation with high compress strength,
such as hard shale, limestone, sandstone, dolomite. etc |
| 637/635 |
0.5~1.1 |
180~40 |
Hard formations with high compressive strength,
such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
4. Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory
About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.
2. We have advanced technology and equipment.
3. Our technician has more than 13 year's professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.
){kind=link}
){kind=link}