It is a kind of high air pressure DTH Hammer without foot valve and without valve, our newest design. It is also one of the most advanced DTH Hammers in the world.
The down-the-hole impactor is an integral part of the down-the-hole drilling rig and belongs to the working device of the down-the-hole drilling rig. The downhole impactor is divided into a low wind pressure downhole impactor, a medium pressure downhole impactor and a high wind pressure downhole impactor.
It is widely used in metallurgical, coal, chemical, building materials, mining and water conservancy, hydropower, highway, railway, national defense, construction and other engineering hole-forming operations, suitable for dry, feng shui mixing and blasthole water wet operation, reliable performance It is the ideal drilling hole device for today.
Working principle of the impactor: At the beginning of the impact stroke, the piston and the valve plate are in the upper position, and the compressed air enters the upper chamber of the cylinder through the radial hole of the valve cover and the valve seat, and pushes the piston to move the impact bit at a high speed downward. When the piston row to the spline groove of the bushing is closed, the pressure in the lower chamber begins to rise, so that the center hole of the upper end of the piston leaves the valve bar, the upper chamber passes through the atmosphere, the pressure is lowered, and the working stroke ends. When the piston hits the tail of the drill bit, the valve piece is reversed due to the upper and lower pressure difference, and the piston repeats the return stroke motion.
General Introduction:
We manufacture DTH Hammers in different sizes ranging from 3 to 12. These hammers are made corresponding to Drilling Bits to carry out prevalent objectives. These hammers are used in various down the hole operations like bench Drilling. These are valve less hammers with optimized air cycle frequency. These are heavy duty hammers that well at greater depths demanding less air usage, delivering minimum performance loss. We offer IR hammer, DHD3.5, DHD340a, DHD360, DHD380, COP and QL hammer. The optimum range of hole size for blast drilling with DTH is 90mm to 254mm, smaller blast holes are generally drilled using top hammer, and larger holes generally use rotary machines. Our hammer like COP and QL are known fort heir reliability and longevity.
1-12 inch middle-low/high air pressure DTH hammer & bit
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit
Shank adapter, coupling sleeves and all kinds of adapters
| Specification: |
Diameter: (mm) |
Weight: (kg) |
| Low air pressure DTH bits CIR type |
68 ~ 200 |
2.6 ~ 48 |
| Middle air pressure BR & COP type |
76 ~ 110 |
3.8 ~ 15 |
| 3 inch high Air pressure DTH bits |
85 / 90 / 95 / 100 / 105 |
4.2 ~ 5.5 |
| 4 inch high Air pressure DTH bits |
105 / 110 / 115 / 120 / 127 |
9 ~ 12 |
| 5 inch high Air pressure DTH bits |
133 / 140 / 146 / 152 / 165 |
15 ~ 18.5 |
| 6 inch high Air pressure DTH bits |
152 / 165 / 178 / 190 / 203 |
26 ~ 36 |
| 8 inch high Air pressure DTH bits |
195 / 203 / 216 / 254 / 305 |
33 ~ 95 |
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory
About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.
2. We have advanced technology and equipment.
3. Our technician has more than 13 year's professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.
Audited Supplier 
){kind=link}
){kind=link}