Diameter 26- 40mm Integral Drill Steel Rod For Rock Drill Quarry
Integral drill rod, another name called integral drill steels, integral rods are used by hand held rock drill in granite
and marble quarries, underground mining, for small blasting hole drilling shank H22x108mm, H19x108mm, and
standard hex. Bit diameters include 20-42mm, different lengths are available from 400mm to 6000mm usually.
It can reduces the expense of impact energy, improves the drilling speed and efficiency, also it can be used for
drilling bore hole diameter from 30mm to 41mm usually. Each rods use premium quality alloy steel and excellent
quality tungsten carbide to assure.
| Shank Style |
Length |
Head Diameter |
| |
Mm |
foot/inch |
Mm |
Inch |
Hex19 × 108mmWe can produce as your request of carbide size, different length of drill rods.
|
400 ~ 4,000 |
1' 4" ~ 13' 1" |
23 ~ 35 |
27/32 ~ 1 3/8 |
| Hex22 × 108mm |
400 ~ 9,600 |
1' 4" ~ 31' 6" |
26 ~ 41 |
1 1/32 ~ 1 39/64 |
| Hex25 × 108mm |
600 ~ 6,400 |
1' 11 5/8" ~ 21' |
33 ~ 45 |
1 19/64 ~ 1 25/32 |
| Hex25 ×159mm |
800 ~ 6,400 |
2' 7" ~ 21' |
35 ~ 42 |
1 3/8 ~ 1 21/32 |
Tapered drill rod,another name called taper rod, tapered drill steels, This provides a hexagonal chuck section to provide
leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position
in the rock drill, and a tapered bit end.Tapered steel lengths-available from 0.6 m to 3.6 m in length-are measured from
the collar to the bit end.
Shank Hexagon: 19 x108 mm, 22x 108mm, 25 x108 mm, 25 mmX159 mm 6, 7, 11, 12 degree taper in most lengths,
taper degree of drill steel is mostly imports for excellent drilling productivity.
For drilling medium-hard to hard and abrasive rock formations,Taper angles of 11 and 12-degrees are normally used
on modern drill rigs, like our model no. PD-Y58 crawler hydraulic rock drill. Also for Y6, Y10, Y24, YT24, Mobile rock
drill pneumatic and hydraulic.
| Types of drill rods |
Specifications |
Length (mm) |
Shank |
| Tapered drill rods |
Taper Angle: 4, 6, 7, 11, 12 degree |
400mm to 8000mm |
Hex22mm*108mm Hex25mm*159mm Hex19mm*108mm |
| Integral drill steel |
Bit diameter: 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm |
400mm to 4800mm |
| Plug hole rods |
Chisel bit diameter: 17mm, 20mm, 22mm |
150mm to 710mm |
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45,T51, ST58,GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Audited Supplier 
){kind=link}