Prodrill Excavator Mounted Dill Rig machine PD90 for Mining Construction
Excavator Mounted Drill Rig attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concretre demolition, construction works, etc. ProDrill rock drills' percussion hour to engine hour ratio is exceptionally good at 60 %, which is substantially higher than what can be achieved with conventional drilling rigs. This is best proven in difficult conditions where other solutions fail to drill holes without the exceptional reach of the excavator's boom.
Besides demanding conditions, ProDrill Excavator Mounted Drill Rig can also be used as hydraulic rock splitter to demolish over sized rock bad and huge concrete building removal.
Features:
1)PD90 Excavator Mounted rock drill suit to over 20 tons excavator mounted machines.
2)The rate of the Pump can reach 200L/min, drilling diameter 38-115mm, 3m depth per time drilling.
3)Drilling speed: 1m/min for hard rock, 1.5-2.0m/min depth for soft rock.
4)Excavator mounted rock drill can use the same type of hydraulic oil pipe line as hydraulic breaker
PD 90 Rock Drill Set:
The PD90 excavator drill attachment set included with a T45-3660mm drill rod , and a T45-Φ102mm drill bit,a screw air compressor set, a 5.2 m propulsion rail (total length 6.0 m), and a spare box.
1) 1PC/ PD-90B Excavator Mounted Rock Drill with hydraulic Driven Compressor 3m3,0.8Mpa. Excavator 20 Tons Required,One can enter the rod 2 meters deep, hydraulic drifter is China-made YHD210 type hydraulic rock drill, aperture 64-102mm,like JCB210 with YQ30 HYDRAULIC screw air compressor.
2) Rock Drill Attachment Arm Length : Rail length 5.2 meters, total length 6.0 meters
3) Without dust collection system.
4) PD90 Excavator Mounted rock drill suit to the 20 tons excavator mounted machines.
5) The rate of the Pump can reach 200L/min, drilling diameter 43-115mm, 3m depth per time drilling.
| products type |
PD-90 |
| available rigidity rock |
F=6-20 |
| drill scope |
38-89mm |
| drill speed |
500-1000mm/min |
| lowest horizontal hole height |
250mm |
| once propel travel |
3m |
| oil pressure |
≤19Mpa |
| compressor type |
1.8m3-3.2m3 |
| size |
7488*140*252mm |
| drifter weight |
115kg |
| whole weight |
1.2t |
Audited Supplier 
){kind=link}
){kind=link}