Product Description
Descriptiion:
Hole opened DTH buttonbits is one of our most important DTH bits extension
1. 15 years manufacturing experience;
2. Certificate: ISO9001:2008
3. Material: Tungsten Carbide YK05 and nickly alloy high wear resistance steel applied.
All products are compatible with many products manufactured, all our products are widely used in mining, tunneling, quarrying, construction, and civil engineering project.
DTH bits for hole opener
1.manufacture as your requirement
2.bit diameter, face shape
3.carbide button shape
4.number of air hole
Bit face shape selection:
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
2. Concave Face
The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
3. Convex Face
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
5. Flat Face Bit
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
Carbife button shape selection:
1. Domed/Round Button
Domed/Round Buttons are usually used as gauge buttons of DTH Bits, suitable for every abrasive and very hard formations.
2. Parabolic/Semi-Ballistic Buttons
Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
3. Ballistic Button
Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and mesium hard formations. They can also be used as gauge buttons if the rock is soft.
4. Sharp Button
Sharp Buttons are usually used as front buttons of DTH Bits for soft formations where fast penetration rates are possible.
5. Flat Button
Flat buttons are usually used as protection buttons to reduce wear on rubbing surfaces of dth bits.
Prodrill are professional designer and manufacturer for the following products: The most advanced high air pressure DTH hammer in China, various kinds of DTH bits, eccentric drilling equipment, symmetric drilling equipment, casing System, various kinds of threaded drilling bits, reverse circulation hammers and bits, shank adapters and coupling sleeves, new-style wells geothermal drilling rig, open-air blasthole drilling rig, all kinds of tool joints and drill pipes and spare parts for drill rig.
DTH hole opener drill bits
Remark |
|
|
|
Qty.× Button Dia.(mm) |
|
| Shank |
GuideDia. (1) |
Reamed Dia. |
Weight |
|
(mm) |
(mm) |
(kg) |
|
|
|
|
Outer |
Front |
|
| For 3.5" hammer |
DHD3.5 |
95 |
130 |
6×14+ |
4×11+3×11 |
8.5 |
| 2×14 |
|
DHD3.5 |
80 |
165 |
8×14 |
8×13+6×11 |
15.1 |
|
100 |
165 |
8×14 |
4×13+4×12+3×12 |
14.5 |
|
DHD3.5 |
110 |
165 |
8×14 |
4×13 |
15.2 |
|
100 |
165 |
8×14 |
4×13+4×12+3×12 |
14.5 |
|
|
115 |
171.5 |
9×16 |
6×14 |
16.1 |
| For 5" hammer |
DHD350R |
75 |
152 |
8×18 |
6×14+2×14+2×14 |
35.2 |
| For 6" hammer |
DHD360 |
165 |
191 |
10×16 |
3×14+4×14 |
74.5 |
|
DHD360 |
108 |
220 |
10×18 |
12×18+2×14+2×14 |
79.3 |
|
DHD360 |
165 |
254 |
12×18 |
12×16+4×14+5×14 |
65.3 |
| For 8" hammer |
DHD380 |
140 |
200 |
10×18 |
8×12+2×14+4×14 |
10.6 |
|
DHD380 |
188 |
254 |
22×18 |
2×18 |
147.4 |
|
DHD380 |
152 |
305 |
14×18 |
10×18+16×16 |
107.8 |
|
DHD380 |
210 |
381 |
16×18 |
28×18 |
120.5 |
| For 12" hammer |
DHD112 |
216 |
312 |
18×18 |
15×18+6×16+6×14 |
133.6 |
|
DHD112 |
254 |
375 |
18×18 |
12×18+15×18 |
136.2 |
|
DHD112 |
311 |
444.5 |
18×19 |
15×19+21×19 |
328.5
|
|
|
|
|
|
|
|
Audited Supplier 
){kind=link}