6 1/4" Tricone Bit IADC535 for Water Well and Oil Field Tricone Bit Rotary drill bits
Description:
1. Elasatomer Sealed Roller Bearing Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure: 1. Abrasion resistance and seizure resistance of the bearing are improved. 2. Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 13 5/8", 14 3/4", 15", 15 1/2", 17 1/2", 22", 24", 26", etc.
IADC Code: 1-- Series, 2-- Series, 3- Serie
2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure: Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure: Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 14 3/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3- Series
Wholesale steel tooth tungsten carbide API tungsten carbide API tricone bit roller bit drill bit
General Introduction:
Key Word:
tricone bit, tricone drill bit, used tricone bits for sale, tci tricone bit, tricone rock roller bits, used tricone bits, tricone rock bit, tci tricone rock bit, tricone roller bit, tricone bit roller bit drill bits, steel tooth tricone bit
Description:
1. Elasatomer Sealed Roller Bearing Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure:Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure:1. Abrasion resistance and seizure resistance of the bearing are improved. 2.Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Main Type Available:Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",13 5/8",14 3/4",15",15 1/2",17 1/2",22",24",26", etc.
IADC Code:1-- Series, 2-- Series,3-Serie
2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure:Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure:Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available:Size: 5 7/8",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",14 3/4",17 1/2", etc.
IADC Code:1-- Series, 2-- Series, 3-Series
3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure:The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure:Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available:Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code:1-- Series,2-- Series,3-- Series
4.Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8",3",3 5/8:",3 7/8",4",4 1/2",4 5/8",4 3/4",6",6 1/2",7 1/2",7 7/8",8 1/2",9 1/2",9 5/8",9 7/8",10 5/8",12 1/4", 17 1/2",etc.
IADC Code: 1-- Series,2-- Series,3-- Series
| IADC |
WOB
(KN/mm) |
RPM
(r/min) |
Applicable Formations |
| 437/447/435 |
0.35~0.9 |
240~70 |
Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,
soft limestone, etc. |
| 517/527/515 |
0.35~1.0 |
220~60 |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone, etc. |
| 537/547/535 |
0.45~1.0 |
220~50 |
Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone,
medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
| 617/615 |
0.45~1.1 |
200~50 |
Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637/635 |
0.5~1.1 |
180~40 |
Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
Terms&Conditions of Ordering:
1 .Payment Terms: T/T (Telegraphic Transfer) or Western Union
2. Delivery Term:
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Transportation:
Sample order: we suggest Courier express or by air
Bulk order: we suggest by air or by sea.
4. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B Our sales team and Technical Support will response for your question within 24 hours (Holidays Excluded) through skype
and: + 86 139 1110 7654
C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund.
Prodrill is not only the experts in the Import & export field but the leader on Mining, Construction equipments and rock drilling tools. Prodrill has a comprehensive supply of Rock tools for world leading top hammer manufacturers like Atlas Copco, Ingersoll-Rand etc. such as: Taper /Percussive Bits and Rod, DTH hammer, Bit & rod, RC hammer, Bit & Rod,ODEX, Symmetric,Concentric overburden Casing System.
3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure: Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3-- Series
4. Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory
| IADC |
WOB
(KN/mm) |
RPM
(r/min) |
Applicable Formations |
| 437/447/435 |
0.35~0.9 |
240~70 |
Very soft formations with low compressive strength and high drillability,such as clay
,mudstone,chalk,gypsum,salt,soft limestone, etc. |
| 517/527/515 |
0.35~1.0 |
220~60 |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone, etc. |
| 537/547/535 |
0.45~1.0 |
220~50 |
Soft to medium formations with low compressive strength, such as
medium, soft shale, medium soft limestone, medium soft sandstone,
medium formation with harder and abrasive interbeds, etc. |
| 617/615 |
0.45~1.1 |
200~50 |
Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637/635 |
0.5~1.1 |
180~40 |
Hard formations with high compressive strength, such as
sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
Audited Supplier 
){kind=link}